Manual Description
G Put drained fuel in an explosion-proof container and put the lid on securely. Do not kink or twist tubes when they are being installed. J After connecting fuel tube quick connectors, make sure quick connectors are secure.
Ensure that connector and resin tube do not contact any adjacent parts. K After installing tubes, make sure there is no fuel leakage at connections in the following steps. Insert hose into fuel tank through fuel filler hose to draw fuel from fuel tank.
Open fuel filler cap and release the pressure inside fuel tank. Remove rear seat cushion trim and pad bolts, then lift up rear seat cushion. If quick connector sticks to tube of fuel level sensor unit, push I and pull quick connector several times until it start to move.
Manual Cover
General