Manual Description
Unladen conditions mean that fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions. After servicing suspension parts, be sure to check wheel alignment.
Measure axial end play of transverse link ball joint by prying between suspension arm and front axle with a iron bar or something similar. Check each mounting point of axle and suspension for looseness and deformation. Check each link, rod, and member for cracks, deformation and other damage.
After installing the alignment targets or head units, raise the vehicle and rotate the wheels 1/2 turn both ways. Before inspection, mount front wheels onto turning radius gauge. Mount rear wheels onto a stand that has same height so vehicle will remain horizontal.
Manual Cover
General