Manual Description
Using a spring compressor (commercial service tool), compress coil spring between spring upper seat and spring lower seat (on strut) until coil spring is free. Make sure coil spring between spring upper seat and spring lower seat is free and then secure piston rod tip so that piston rod does not turn, and remove piston rod lock nut. Gradually release spring compressor (commercial service tool), and remove coil spring.
Compress coil spring using a spring compressor (commercial service tool), and install it onto strut. Be sure spring compressor (commercial service tool) is securely attached to coil spring. Fix strut mounting insulator, then tighten piston rod lock nut with specified torque.
Remove mounting bolt between transverse link and front suspension member with power tool. Axial end play : 0 mm (0 in) If it is outside the specified range, replace suspension arm assembly. Remove stabilizer connecting rod lower nut, separate stabilizer bar and stabilizer connecting rod with power tool.
Manual Cover
General