Manual Description
G Install the air cleaner filter by aligning the seal with the notch of air cleaner case. Rotate crankshaft by 240 degrees clockwise (when viewed from engine front) to align No. Check that the valve clearances for cold engine are within the specifications by referring to the specified values.
Install compression gauge with an adapter (commercial service tool) onto spark plug hole. When the gauge pointer stabilizes, read the compression pressure and the engine rpm. Remove air cleaner cases (upper and lower) with mass air flow sensor and air duct assembly.
Loosen mounting nuts and bolts in the reverse order as shown in the figure, and remove intake manifold collector and gasket. Loosen mounting nuts and bolts in the reverse order as shown in the figure to remove intake manifold with power tool. Remove three way catalyst (bank 1 and bank 2) from exhaust manifolds (bank 1 and bank 2).
Manual Cover
General