Manual Description
It provides the power supply to each illumination lamp. N Combination meter enters in the nighttime mode according to position light request signal. Combination meter Controls the each illumination in the nighttime mode.
Sets the interior room lamp gradual brightening time. Also cuts the power supply when the interior room lamp battery B saver activating. NO >> Check that each interior room lamp has no internal short circuit.
Remove the step lamp bulbs (driver side and passenger side). Pointer of tester should (O) (built in key slot) Output the key slot. BCM increases the turn signal lamp blinking speed if the bulb or harness open is detected with the turn signal lamp operating.
Manual Cover
General