Manual Description
Low power consumption mode (sleep) - Low power consumption control is active. Close the hood and lift the wiper arms from the windshield. Turn the ignition switch ON, and within 20 seconds, press the front door switch (driver side) 10 times.
After that the horn sounds once and the auto active test starts. The oil pressure warning lamp starts blinking when the auto active test starts. After a series of the following operations is repeated 3 times, auto active test is completed.
Hi Operates the front wiper relay and front wiper high relay. Modern C vehicle is equipped with many electronic control unit, and each control unit shares information and links with other control units during operation (not independent). Each control unit transmits/receives data but selectively reads required data only.
Manual Cover
General