Manual Description
After that the horn sounds once and the auto active test starts. The oil pressure warning lamp starts blinking when the auto active test starts. After a series of the following operations is repeated 3 times, auto active test is completed.
Hi Operates the front wiper relay and front wiper high relay. Check that the front wiper operates at the LO operation. With operating the test item, check front wiper operation.
Check that the front wiper operates at the HI operation. Check continuity between front wiper motor harness connector and ground. B Combination switch switches polarity between front washer operating and rear washer operating to supply power to the washer pump on ground.
Manual Cover
General