Manual Description
If there is any of irregular conditions, replace wheel hub and bearing assembly. Hang caliper assembly in a place where it will not interfere with work. Remove cotter pin, then loosen suspension arm mounting nut of axle housing.
Remove parking brake shoe and parking brake cable from back plate. Remove anchor block mounting nuts, and then remove anchor block and back plate from axle housing. Remove stabilizer connecting rod (upper side) with power tool.
Remove front lower link (shock absorber side) with power tool. Separate suspension arm from axle housing so as not to damage ball joint boot using ball joint remover, and then remove axle housing from the vehicle. Axle Housing Check the axle housing for wear, cracks, and damage.
Manual Cover
General