Manual Description
Modern C vehicle is equipped with many electronic control unit, and each control unit shares information and links with other control units during operation (not independent). Each control unit transmits/receives data but selectively reads required data only. Check continuity between driver air bag module harness connector and combination switch (spiral cable) harness connector.
Check harness connection between air bag diagnosis sensor unit and combination meter. This system includes seat belt switch inputs and dual stage front air bag modules. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing J serious injury.
For approximately 3 minutes after the battery negative terminal is removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Always place driver and front passenger air bag modules with the pad side O facing upward and seat mounted front side air bag module standing with the stud bolt side facing down. P Always replace instrument panel pad following front passenger air bag deployment.
Manual Cover
General