Manual Description
Xenon headlamp switches the high beam and the low beam with one xenon bulb each on right and left. The mobile valve shade (3) is switched to the high beam position through the actuator rod (2). After a series of the following operations is repeated 3 times, auto active test is completed.
Disconnect the front turn signal lamp connector or the rear combination lamp connector. This system includes seat belt switch inputs and dual stage front air bag modules. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing serious injury.
Insert an appropriate tool between the optical sensor and the instrument upper panel. Disconnect the connector, rotate the back-up lamp bulb socket (1) counterclockwise and unlock it. Get detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurs).
Manual Cover
General