Manual Description
Check voltage between starter motor terminal 2 and ground using a digital circuit tester. Check voltage between starter motor terminal 2 and battery positive terminal using a digital tester. Check to see if pinion locks in one direction and rotates smoothly in the opposite direction.
Terminal B supplies power to charge the battery and operate the vehicle's electrical system. Ground is supplied to terminal 68 of the combination meter through terminal L of the alternator. If the charge warning lamp illuminates with the engine running, a malfunction is indicated.
Raise and hold the engine speed at 1,500 to 2,000 rpm for about 5 seconds, then return to the engine to idle. I Some engines may have a higher idle initially after starting, particularly when the engine is cold.
Manual Cover
General