Manual Description
They receive only necessary signals from other control units to operate various functions. Under this condition, multiple control units related to the root cause malfunction or go into fail-safe mode. The front wiper moves under continuous operation mode even though the front wiper switch being in the intermittent position.
It is useful for detecting H the root cause by finding a signal related to the symptom, and by checking transmission and reception unit. The error may temporarily correct itself, making it difficult to determine the root cause. Identifying the root cause Draw a line on the diagnosis sheet to indicate the possible cause.
This system includes seat belt switch inputs and dual stage front air bag modules. The spliced wire becomes separated and the characteristics of twisted line are lost. Check the following terminals and connectors for damage, bend and loose connection (connector side and harness side).
Manual Cover
General