Manual Description
If fluid leakage at a connection is noticed, loosen the connection and then retighten. Check steering gear boots for accumulation of fluid, indicating a leak from the steering gear. Start the engine and turn the steering wheel fully to the right and left several times.
If air bubbles or cloudiness exists, perform steps 3 and 4 again until air bubbles and cloudiness do not exist. Check if movement exists when the steering wheel is pushed up and down, left and right and in the axial direction. End play of the axle direction for steering wheel : 0 mm (0 in) Check if the mounting nuts for the steering gear assembly are loose.
Lightly turn the steering wheel left and right to the point where the tires start moving, and measure the distance that the outer circumference of the steering wheel travels. Turn the tires straight ahead, check if the steering wheel is in the neutral position. If it is not in the neutral position, remove the steering wheel and reinstall it correctly on the steering stem, within two teeth of the original position.
Manual Cover
General