Manual Description
Apply clean engine oil to the oil filter seal circumference of the H new oil filter as shown. Screw on the oil filter manually until it touches the installation surface, then tighten it by 2/3 turn as shown. Check oil cooler for clogging by blowing compressed air through engine coolant inlet.
If replacement is necessary, remove relief valve by prying it out using a suitable tool. Measure the inner diameter of oil pump body to brazed portion M (position 5) using suitable tool. Measure the outer diameter of protruded portion of inner rotor (position 6) using suitable tool.
This system includes seat belt switch inputs and dual stage front air bag modules. Remove the old liquid gasket adhering to the gasket application surface and the mating surface using suitable tool. Thoroughly clean the mating surfaces and remove adhering moisture, grease and foreign material.
Manual Cover
General