Manual Description
When energized, this relay directs power to the parking and illumination lamps, which then illuminate. Under this condition, the illumination J lamps remain illuminated for 30 minutes unless the lighting switch position is changed. If the lighting switch position is changed, then the illumination lamps are turned off after a 30 second delay.
The illumination control switch is a part of the combination meter. The combination meter controls illumination intensity by varying Combination meter (illumination control switch) ground to the illumination lamps based on the illumination control switch position. Sets the interior room lamp gradual brightening time.
This system includes seat belt switch inputs and dual stage front air bag modules. Using a suitable tool (A), remove map lamp lens (1). Release one side of the bulb (2) from the tab, then pull straight downward to remove.
Manual Cover
General