Manual Description
Narrow down the noise to a more specific area and identify the cause of the noise by: removing the components in the area that you suspect the noise is coming from. Do not use too much force when removing clips and fasteners, otherwise clips and fasteners can be broken H or lost during the repair, resulting in the creation of new noise. L - insulate components with a suitable insulator such as urethane pads, foam blocks, felt cloth tape or urethane tape.
The following materials not found in the kit can also be used to repair squeaks and rattles. Operate the vehicle under the same conditions as when the noise originally occurred. If you saturate the area with silicone, you will not be able to recheck the repair.
Door striker out of alignment causing a popping noise on starts and stops Tapping or moving the components or pressing on them while driving to duplicate the conditions can isolate many of these incidents. Most of these incidents are repaired by pushing up on the console at the clip locations until the clips engage. These conditions should be duplicated when verifying and isolating the cause of the noise.
Manual Cover
General