Manual Description
A The fluorescent dye leak detector is not a replacement for an electronic refrigerant leak detector. B For your safety and the customer's satisfaction, read and follow all manufacturer's operating instructions and precautions prior to performing work. The compressor shaft seal should only be repaired after confirming the leak with an electronic refrigerant leak detector (J-41995).
Fluorescent dye left on a surface for an extended period of time cannot be removed. F The fluorescent properties of the dye will remain for over three (3) years unless a compressor failure occurs. If a wrong O-ring is installed, refrigerant will leak at or around the connection.
L After connecting line, conduct leak test and make sure that there is no leakage from connections. When the refrigerant leaking point is found, disconnect that line and replace the O-ring. If the surface is contaminated with oil, wipe it off by using a clean waste cloth moistened with thinner.
Manual Cover
General