Manual Description
The combination meter then activates the appropriate turn signal indicator and audible buzzer. Under this condition, the headlamps remain illuminated for 5 minutes unless the lighting switch position is changed. A - It reads this change of the voltage as the status signal of the combination switch.
When the brake pedal is depressed, the combination meter receives a stop lamp switch signal from the stop lamp switch. After a series of the following operations is repeated 3 times, auto active test is completed. Check the continuity between daytime light relay 2 terminals under the following conditions.
The high beam lamps are wired in series which causes them to illuminate at a reduced intensity. Check the continuity between daytime light relay 1 terminals under the following conditions. Check continuity between the front fog lamp harness connector terminal and ground.
Manual Cover
General