Manual Description
E Check cable for wear and damage, and replace if necessary. Partially engage parking brake pedal to access adjusting nut. Insert a deep socket wrench to rotate adjusting nut and loosen cable until tension is sufficiently released.
Using wheel nuts, secure the disc to the hub to prevent it from tilting. Remove the adjuster hole plug installed on the disc rotor. Turn the adjuster in the opposite direction by 5 or 6 notches after locking.
If parking brake cable was replaced, operate parking brake pedal 10 or more times with a full stroke of 232. Release the parking brake pedal and rotate the disc rotor to make sure there is no drag. Remove the instrument lower panel LH and center console.
Manual Cover
General