Manual Description
If steering wheel rotation is required when battery power is interrupted, follow the procedure below before starting the repair operation. Oil will shorten the life of the rubber bushings, so wipe off any spilled oil immediately. Check each mounting point of the suspension components for any excessive looseness or damage.
If outside of the specified value, adjust the camber using the adjusting bolt in the front lower link. If toe-in is out of specification, inspect and replace any damaged or O worn rear suspension parts before adjusting. B Check the shock absorber for smooth operation through a full stroke, both compression and extension.
Position a suitable jack under the front lower link to support the shock absorber. Position the drilled hole downward and drain oil by moving the piston rod several times. Remove the shock absorber upper and lower end bolts using power tool, and remove the shock absorber.
Manual Cover
General