Manual Description
Do not tap or push/pull the component with excessive force, otherwise the noise will be eliminated only temporarily. The following materials not found in the kit can also be used to repair squeaks and rattles. Operate the vehicle under the same D conditions as when the noise originally occurred.
If you saturate the area with silicone, you will not be able to recheck the repair. Front or rear windshield touching headlining and squeaking Again, pressing on the components to stop the noise while duplicating the conditions can isolate most of these incidents. Most of these incidents are repaired by pushing up on the console at the clip locations until the clips engage.
These conditions should be duplicated when verifying and isolating the cause of the noise. Most of these incidents can be repaired by repositioning the component or applying urethane tape to the contact area. Hood striker out of adjustment These noises can be difficult to isolate since they cannot be reached from the interior of the vehicle.
Manual Cover
General