Manual Description
Seat belt G pre-tensioners should be replaced even if the seat belts were not in use during a frontal collision in which the air bags were deployed. Inspect the seat belt attaching area for damage or I distortion and repair if necessary before installing a new seat belt assembly. Check that the seat belt retractor, seat belt anchor and buckle bolts are tightened firmly.
Check the shoulder seat belt guide and shoulder belt height adjuster for front seats. Check that guide M swivels freely and that webbing lays flat and does not bind in guide. If the seat belt does not return smoothly, wipe the inside of the loops with a clean paper cloth.
Dirt build-up in the O loops of the upper anchors can cause the seat belts to retract slowly. If the webbing does not return smoothly, the cause may be an accumulation of dust or dirt. Hold the seat belt at the center pillar webbing opening with a clip or other device.
Manual Cover
General