Manual Description
If work is interrupted, a clean cover must be placed over parts. Fabric shop cloths must not be used because of the danger of lint adhering to parts. Rotate the wheel hub and check for irregular conditions or unusual noise.
Remove the brake caliper torque member bolts, leaving the brake hose attached. Put alignment marks on the disc brake rotor and on the wheel hub and bearing. For 4WD vehicles, loosen, but do not remove, the wheel hub lock nut from the drive shaft using power tool.
For 4WD vehicles, use a piece of wood and a hammer, tap on the wheel hub lock nut to disengage the drive shaft from the wheel hub and bearing. Loosen, but do not remove, the wheel hub lock nut from the drive shaft using power tool. Using a piece of wood and a hammer, tap on the wheel hub lock nut to disengage the drive shaft from the wheel hub and bearing.
Manual Cover
General