Manual Description
SC 쐌 Growling noise is emitted from wheel bearing during operation. If wheel bearing inner race (outside) is removed together with wheel hub, press out wheel bearing inner race. Use suitable protector or SC cloth during removal and installation.
Separate drive shaft from knuckle by lightly tapping it. Put matching marks on slide joint housing and inner race, before separating joint assembly. Pry off snap ring A” with a screwdriver, and pull out slide joint housing.
Remove snap ring C”, then remove ball cage, inner race and balls as a unit. Before separating joint assembly, put matching marks on drive shaft and joint assembly. Check parts for evidence of deformation and other damage.
Manual Cover
General