Manual Description
Be careful not to cut your hand on the insulator edge. Front exhaust tube hanger bracket models) models) 13. Before installing a new heated oxygen sensor, clean the exhaust tube threads using commercial D service tool and approved anti-seize lubricant.
Discard any heated oxygen sensor which has been dropped from a height of more than 0. If any mounting insulator is badly deformed, repair or replace it. If deposits such as mud pile up on the mounting insulator, clean and inspect them.
F Temporarily tighten the mounting nuts on the exhaust manifold side and the mounting bolts on the vehicle side. Check each part for interference with other components, and then tighten the nuts and bolts to specification. H Check that the mounting brackets and mounting insulators are installed properly and free from excessive stress.
Manual Cover
General