Manual Description
Disconnect the fluid cooler inlet and outlet rubber hoses from the steel cooler tubes or bypass valve. Blow compressed air regulated to 5 - 9 kg/cm2 (70 - 130 psi) through the cooler outlet hose for 10 seconds to force out any remaining fluid. Position an oil pan under the banjo bolts that connect the fluid cooler steel lines to the transaxle.
Blow compressed air regulated to 5 - 9 kg/cm2 (70 - 130 psi) through each steel line from the cooler side back toward the transaxle for 10 seconds to force out any remaining fluid. Position an oil pan under the automatic transaxle's inlet and outlet cooler hoses. Tie a common white, basket-type coffee filter to the end of the cooler inlet hose.
The radiator/ fluid cooler must be replaced and the inspection procedure is ended. Main front large planetary pinion gear rotates itself clockwise for rear planetary pinion and one. Main planetary carrier revolves clockwise due to reaction force of front small planetary pinion gear.
Manual Cover
General