Manual Description
Blow air into the back side of radiator core, with the air hose pointed vertically downward. Blow air again into all the radiator core surfaces once per minute until no water sprays out. Open radiator drain plug at the bottom of radiator and remove the radiator filler cap.
For a complete cooling system drain, remove the reservoir tank and drain the coolant, and then clean the reservoir tank before installation. Check the drained coolant for contaminants such as rust, corrosion or discoloration. If the cooling system was drained completely, install the reservoir tank and the cylinder block drain A plugs and tighten to specification.
Install the Tool by installing the radiator cap adapter onto the radiator neck opening. Then attach the gauge body assembly with the refill tube and the venturi assembly to the radiator cap adapter. Insert the refill hose into the coolant mixture container that is placed at floor level.
Manual Cover
General