Manual Description
Spare tire, jack, hand J tools and mats in designated positions. Spare tire, jack, hand tools and mats in designated positions. Make sure the alignment machine is properly calibrated.
After installing the alignment targets or head units, raise the vehicle and rotate the wheels 1/2 turn both ways. Bounce the front of vehicle up and down to stabilize the vehicle height (posture). Put a mark on base line of the tread (rear side) of both front tires at the same height as hub center as shown.
Measure the distance A” on the rear side of the front tires as shown. Push the vehicle slowly ahead to rotate the wheels 180° degrees (1/2 a turn). Measure the distance B” on the front side of the front tires at the same marks as shown.
Manual Cover
General