Manual Description
Remove the fuel level sensor, fuel filter, and fuel pump assembly from the fuel tank. A - Align the connector with the tube, then insert the connector straight into the tube until a click is heard. Turn the ignition switch to ON (without starting the engine) to check the connections for fuel leaks with the electric fuel pump applying fuel pressure to the fuel piping.
Disconnect the harness connectors (1) and the wire connector (4). Depress the tabs (3) and remove the floater arm assembly (5). Assembly Assembly is the reverse order of disassembly.
Fuel level sensor unit, fuel filter, and O fuel pump assembly 10. Check the fuel level with the vehicle on a level surface. If the fuel gauge indicates more than the level as shown (7/8 full), drain the fuel from the fuel tank until the fuel gauge indicates a level at or below as shown (7/8 full).
Manual Cover
General