2008 Nissan Quest Repair Manual - Instrument Panel (Section IP)

2008 Nissan Quest Repair Manual - Instrument Panel (Section IP)
Posted on 24 May, 2015
Model: 2008 Nissan Quest
Pages: 19


File size: 1 MB

Download Manual

Manual Description
C If it is difficult to duplicate the noise, drive the vehicle slowly on an undulating or rough road to stress the vehicle body. Narrow down the noise to a more specific area and identify the cause of the noise by: Removing the components in the area that you suspect the noise is coming from. G Do not use too much force when removing clips and fasteners, otherwise clips and fasteners can be broken or lost during the repair, resulting in the creation of new noise.

Operate the vehicle under the same conditions as when the noise originally occurred. If you saturate the area with silicone, you will not be able to recheck the repair. Door striker out of alignment causing a popping noise on starts and stops Tapping or moving the components or pressing on them while driving to duplicate the conditions can isolate many of these incidents.

Most of these incidents are repaired by pushing up on the console at the clip locations until the clips engage. These conditions should be duplicated when verifying and isolating the cause of the G noise. Most of these incidents can be repaired by repositioning the component or applying urethane tape to the contact area.


Manual Cover
2008 Nissan Quest Repair Manual - Instrument Panel (Section IP) Image


General
Year 2008
Make Nissan
Model Quest
Language English
Pages 19
Filetype PDF (Download)
File size 1 MB

Privacy Policy    Contact us