Manual Description
Door striker out of alignment causing a popping noise on starts and stops Tapping or moving the components or pressing on them while driving to duplicate the conditions can isolate many of these incidents. Most of these incidents are repaired by pushing up on the console at the clip locations until the clips engage. These conditions should be duplicated when verifying and isolating the cause of the G noise.
Most of these incidents can be repaired by repositioning the component or applying urethane tape to the contact area. Hood striker out of adjustment These noises can be difficult to isolate since they cannot be reached from the interior of the vehicle. The best method is to secure, move or insulate one component at a time and test drive the vehicle.
Repairs can usually be made by moving, adjusting, securing, or insulating the component causing the noise. The retained power operation is canceled when the driver or passenger side door is opened. According to the trouble diagnosis chart, repair or replace the cause or replace of the malfunction.
Manual Cover
General