Manual Description
Then dip a cloth into fresh water, and wring the water out of the cloth to wipe the detergent off. This information is necessary to duplicate the conditions that exist when the noise occurs. The noise characteristics J are provided so the customer, service adviser and technician are all speaking the same language when defining the noise.
P Often the degree of acceptable noise level will vary depending upon the person. This information can be used to duplicate the same conditions when you confirm the repair. Narrow down the noise to a more specific area and identify the cause of the noise by: removing the components in the area that you suspect the noise is coming from.
Do not use too much force when removing clips and fasteners, otherwise clips and fasteners can be broken or lost during the repair, resulting in the creation of new noise. Operate the vehicle under the same conditions as when the noise originally occurred. If you saturate the area with silicone, you will not be able to recheck the repair.
Manual Cover
General