Manual Description
Depending on the signals received, the air bag diagnosis sensor unit can disable the passenger front air bag completely. If a driver air bag direct-connect harness connector is damaged, the spiral cable must be replaced. Disconnect the negative and positive battery cables, then wait at least 3 minutes.
Disconnect the driver air bag harness and horn connectors, then remove the driver air bag module. Remove wiper/washer switch connector, then pinch the tabs at wiper/washer switch base and slide switch away from steering column to remove. While pressing tabs, pull lighting and turn signal switch toward driver door and disconnect from base.
O After the work is completed, perform self-diagnosis to make sure no malfunction is detected. Service replacement passenger air bag modules use tab-locking style harness connectors. If a direct-connect harness connector is damaged, the front passenger air bag must be replaced and the wiring harness modified.
Manual Cover
General