Manual Description
If there is any of irregular conditions, replace wheel hub assembly. Plug : N·m (kg-m, ft-lb) : Always replace after every disassembly. Hang caliper assembly in a place where it will not interfere with work.
Fix the disc rotor with wheel nuts and remove the adjusting hole plug. Using suitable tool, rotate adjuster (1) in the direction (B) to retract and loosen brake shoe. Remove parking brake and rear cable from back plate.
Remove front lower link from shock absorber with power tool. Remove cotter pin, then remove suspension arm mounting nut. Separate suspension arm from axle housing, using ball joint remover (commercial service tool), and then remove axle housing.
Manual Cover
General