Manual Description
Selecting +1” or −1” or −2” is selected, that may cause irregular driveability. Many electronic control units are equipped onto a vehicle, and each control unit shares information and links with other control units during operation (not independent). Each control unit transmits/receives data but selectively reads required data only.
Drive vehicle and maintain the following conditions for at least 2 consecutive seconds. Check voltage between transmission range switch vehicle side harness connector terminal and ground. Start engine and maintain the following conditions for at least 5 consecutive seconds.
Check voltage between primary speed sensor vehicle side harness connector terminals. Check voltage between primary speed sensor vehicle side harness connector terminal and ground. Start engine and maintain the following conditions for at least 12 consecutive seconds.
Manual Cover
General