Manual Description
Remove four clips C205 from the top of the front grille, pull up to unclip bottom and remove. Remove clips C205 and screws located on front side of fender protector at wheel opening. Reach behind and carefully pull door trim panel from inside handle until finisher pops off.
Arrange equal lengths of link and wire assemblies on both sides of sunroof opening. Check sunroof lid assembly for normal operations (tilt-up, tilt-down, open, and close). Loosen glass lid securing bolts (3 each on left and right sides), then tilt glass lid down.
If leakage occurs around trunk room, remove trunk room side trim and check connecting area. Check link to determine if coating film has peeled off to such an extent that substrate is visible. Visually check to determine if a sufficient amount of petroleum jelly has been applied to wire or rail groove.
Manual Cover
General