Manual Description
Disconnect air breather hose clips and disconnect air breather hose from resonator. When installing air breather hose on two way connector, aim paint mark face toward the vehicle front. When installing air breather hose on two way connector, push it until it hits transaxle case.
When installing air breather hose to resonator, make sure that clips are fully inserted. Move 1st-2nd fork rod (1), 3rd-4th and 5th-6th fork rod (2), and reverse fork rod (3) to neutral position. Remove input shaft assembly (1), mainshaft assembly (2), and A 1st-2nd fork rod (3) from clutch housing.
Remove differential side oil seals (1) from clutch housing and H transaxle case using a suitable tool. Remove differential side bearing outer race (1) and shim (2) from transaxle case using a brass bar as shown. Remove select lever oil seal and bushings from transaxle case using a suitable tool.
Manual Cover
General