Manual Description
This information can be used to duplicate the same conditions when you confirm the repair. C If it is difficult to duplicate the noise, drive the vehicle slowly on an undulating or rough road to stress the vehicle body. Narrow down the noise to a more specific area and identify the cause of the noise by: removing the components in the area that you suspect the noise is coming from.
Do not use too much force when removing clips and fasteners, otherwise clips and fasteners can be G broken or lost during the repair, resulting in the creation of new noise. Do not tap or push/pull the component with excessive force, otherwise the noise will be eliminated only H temporarily. BL placing a piece of paper between components that you suspect are causing the noise.
K - insulate components with a suitable insulator such as urethane pads, foam blocks, felt cloth tape or urethane tape. The following materials not found in the kit can also be used to repair squeaks and rattles. Operate the vehicle under the same conditions as when the noise originally occurred.
Manual Cover
General