Manual Description
Remove spiral cable from steering column assembly with combination switches attached. Remove tilt lever knob from tilt lever by inserting a suitable tool into slot of tilt lever knob, then depress tab and withdraw tilt lever knob. Remove mounting screws of knee protector, then remove knee protector from vehicle.
On models equipped with column shift, disconnect shift cable from steering column. Remove mounting nuts from steering member, remove steering column assembly from steering member. Raise vehicle, then remove mounting bolt (lower side) of lower joint and remove lower joint from vehicle.
Make sure the number of turns are the same from the straight-forward position to left and right locks. Make sure that the steering wheel is in a neutral position when driving straight ahead. When installing steering column to steering member, install mounting nut from front side of vehicle.
Manual Cover
General