Manual Description
This system includes seat belt switch inputs and dual stage front air bag modules. Seat belt assemblies not in use during a collision should also be replaced if either damage or improper operation is noted. Replace any seat belt assembly (including anchor bolts) if: The seat belt was in use at the time of a collision (except for minor collisions and the belts, retractors and buckles show no damage and continue to operate properly).
Inspect the seat belt attaching area for damage or distortion and repair as necessary before installing a new seat belt assembly. The seat belt pre-tensioner should be replaced even if the seat belts are not in use during the collision in which the air bags are deployed. M Install the connector with the lock raised, and push the lock into the connector.
Insure that seat belt height adjuster is locked in the lowest position during installation. Remove bolts from anchor bracket and remove center seat belt retractor and belt assembly. F Position seat belt buckle anchor brackets within anti-rotation beads on the floor.
Manual Cover
General