Manual Description
Replace inner and outer races of tapered roller bearings and needle bearings as a set. Arrange the disassembled parts in accordance with their assembled locations and sequence. After disconnecting vacuum or air hoses, attach a tag to indicate the proper connection.
When checking for ignition spark or measuring engine compression, make tests quickly and only when D necessary. Do not run engine when the fuel tank level is low, otherwise the engine may misfire, causing damage to the catalyst. Using a fuel other than that specified could adversely affect the emission control devices and systems, and could H also affect the warranty coverage validity.
Before disconnecting pressurized fuel line from fuel pump to injectors, be sure to release fuel pressure. If there is a trace of tube bulging left on the old rubber hose, align rubber hose at that position. After installing leaf spring clamps, apply force to them in the direction of the arrow, tightening rubber hose equally all around.
Manual Cover
General