Manual Description
Install the drain plug with sealant applied on the threads to the rear final drive assembly. Fill the rear final drive assembly with new differential gear oil until the level reaches the specified level near the filler plug hole. Install the filler plug with sealant applied on the threads to the rear final drive assembly.
Make sure that differential gear oil is not leaking from the rear final drive assembly or around it. Then drive the new front oil seal in evenly until it becomes flush with the gear carrier using Tool. Apply multi-purpose grease to the lips and differential gear oil to the circumference of the new front oil seal.
Install the companion flange to the drive pinion while aligning the matching marks. Apply anti-corrosive oil to the threads of the drive pinion and the seating surface of the new drive pinion lock nut and new drive pinion lock nut washer. If the total preload torque exceeds the specifications, replace the collapsible spacer and tighten it again to adjust.
Manual Cover
General