Manual Description
Support the rear final drive and suspension assembly using a suitable jack. Remove the shock absorber upper and lower nuts and bolts using power tool. Support the rear final drive assembly with a suitable jack to relieve the tension from the leaf spring.
The axle weight should be supported, but there should be no compression in the spring. Remove the shock absorber lower nut and bolt using power tool. Remove the four rear spring clip U-bolt nuts using power tool, G then remove the rear spring pad.
Remove the rear spring shackle lower nut and bolt using power tool. Remove the rear leaf spring front nut and bolt using power tool. Install the rear spring shackle and rear leaf spring front nut and bolt.
Manual Cover
General