Manual Description
Remove pinch bolt from steering knuckle using power tool, then separate lower link ball joint from steering knuckle. In order to adjust camber and caster on these vehicles, first replace the lower link bolts and washers with adjustable (cam ) bolts and washers. N After installation, check that the front wheel alignment is within specification.
Remove stabilizer bar mounting bracket bolts and connecting rod nuts using power tool, as shown. Set the shock absorber in a vise, then loosen (without removing) the piston rod lock nut as shown. The spring compressors must be tightened alternately and evenly so as not to tilt the spring.
When installing coil spring on shock absorber, the lower end (2) and upper end (3) must be positioned as shown. Install upper spring insulator (3) with studs located in line with lower shock mount and in lower seat step (2). In order to adjust camber and caster on these vehicles, first replace the lower link bolts and washers with adjustable (cam) bolts and washers.
Manual Cover
General