Manual Description
This system includes seat belt switch inputs and dual stage front air bag modules. Remove the old liquid gasket adhering to the gasket application surface and the mating surface using suitable tool. Thoroughly clean the mating surfaces and remove adhering moisture, grease and foreign material.
Apply the liquid gasket without breaks to the specified location with the specified dimensions. Serious burns could occur from high-pressure engine coolant escaping from the radiator or reservoir. First, turn the cap a quarter of a turn to release any built-up pressure, then push down and turn the cap all the way to remove it.
Open the radiator drain plug at the bottom of the radiator, and remove the radiator filler cap. This is the only step required when partially draining the cooling system (radiator only). When draining all of the coolant in the system for engine O removal or repair, it is necessary to drain the cylinder block.
Manual Cover
General