Manual Description
Install the rear spring pad, and new rear spring clip U-bolt nuts under the rear final drive axle case. Tighten the rear spring clip U-bolt nuts diagonally and evenly using the following sequence: a. Tighten the rear spring clip U-bolt nuts until the rear spring pad I contacts the rear final drive axle case.
Tighten the rear spring clip U-bolt nuts diagonally and evenly to 50 N·m (5. Tighten the rear spring clip U-bolt nuts to specification so the lengths of all the exposed rear spring clip U-bolt threads under the rear spring pad are equal in length as shown. Install the shock absorber, and finger-tighten the nuts.
Remove the jack supporting the rear final drive assembly and bounce the rear of the vehicle to stabilize the suspension. Tighten the rear spring shackle nuts, rear leaf spring front nut and shock absorber nuts to specification. Spare tire, jack, hand tools and mats in designated positions.
Manual Cover
General