Manual Description
Loosen lock nut (A) on the input rod, then turn input rod to adjust the brake pedal to specified height. Loosen lock nut (A) on the input rod, then turn input rod to adjust the brake pedal to the specified height. This might damage the paint, so if splashing it, immediately wipe off the area and wash away with water.
Make sure there is no foreign material in reservoir tank, and refill with new brake fluid. Repeat this process a few times, then pause to add new brake fluid to master cylinder. With brake pedal depressed, loosen bleed valve to let the air out, and then tighten it immediately.
If equipped, disconnect the adjustable brake pedal cable from O the adjustable pedal electric motor. There should be no binding or sticking when applying or releasing the brake pedal. There should be no binding or sticking when adjusting the brake pedal forward or backward.
Manual Cover
General