Manual Description
When the brake pedal is depressed, the combination meter receives a stop lamp switch signal from the stop lamp switch. After a series of the following operations is repeated 3 times, auto active test is completed. Check the continuity between daytime light relay terminals under the following conditions.
Disconnect the front combination lamp connector, rear combination lamp connector and license plate lamp connector. Disconnect the front combination lamp connector, door mirror connector (if equipped with turn signals in N the mirrors) and the rear combination lamp connector. With turn signal switch operating, check the voltage between the door mirror (if equipped with turn signals in the mirrors) harness connector and ground.
Check continuity between the door mirrors and ground (if equipped with turn signals in the mirrors). Disconnect the front combination lamp connector, door mirror connector (if equipped with turn signals in the mirrors) and the rear combination lamp connector. J 1 - 39: Displayed if any previous malfunction is present when current condition is normal.
Manual Cover
General