Manual Description
Verify relation between the symptom and the condition when the symptom is detected. A short circuit inspection is also required for the circuit check in the Diagnostic Procedure. D When symptom was described by the customer, refer to the confirmed symptom in step 3 or 4, and check that the symptom is not detected.
Check that security indicator lamp illuminates for 30 seconds. After 30 seconds, security indicator lamp will start to blink. Open any door before unlocking with keyfob or ignition key.
F If multiple keys are attached to the key holder, separate them before work. Using a registered key (*2), turn ignition switch to ON”. Maintain ignition switch in ON” position for at least 5 seconds.
Manual Cover
General