Manual Description
This system includes seat belt switch inputs and dual stage front air bag modules. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing serious injury. The axle oil seal must be replaced every time the axle shaft assembly is removed from the axle shaft housing.
The axle oil seal must be replaced every time the axle shaft assembly C is removed from the axle shaft housing. The axle oil seal must be I replaced every time the axle shaft assembly is removed from the axle shaft housing. Secure the axle shaft in a suitable vise, then use a 1/4 in size drill bit to drill a hole approximately 3/4 into the thickness of the bearing ring retainer [3/4 thickness is approximately 6.
Pull the axle shaft bearing off of the axle shaft using Tool and a suitable press. If replacing the axle shaft, install a new wheel sensor rotor on the new axle shaft. If installing a new axle shaft, install a new wheel sensor rotor onto the new axle shaft.
Manual Cover
General